CNSMT SLIM KIC 2000 STAR 6/9-channel reflow temperature tester profile
| Accuracy: | +/-1.2℃ |
| Resolution: | 0.3 ℃ ～ 0.1 ℃ |
| Internal operating temperature: | 0 ℃ ～105 ℃ |
| Suitable for thermocouples: | 9/12 K-type thermocouple |
| Measuring temperature range: | -150 ° C ~ 1050 ° C |
| System compatibility: | Personal computer |
| Power requirements: | 9 volt alkaline battery |
| Dimensions (with standard insulation sleeve): | Length 323*Width 86*Height 26 (mm) 9 channels |
| System minimum requirements | Length 323* width 108* height 26 (mm) 12 channels |
| KIC 2000 furnace temperature tester |
| KIC SlimKICTM gives you a high degree of accuracy and automation! |
| 1. High performance software |
| 2. Fast and easy to use |
| 3. More accurate and optimized process settings |
| KIC furnace temperature tester KIC2000, reflow oven temperature tester KIC2000 technical parameters and description: |
| 1. Traditional temperature profile measurement and setup has always been a time consuming task, and KIC's SlimKIC Start temperature/time process setter solves this traditional problem. |
| 2. The operator can select the solder paste used from the database of solder paste properties that have been set. SlimKIC Start automatically sets the required process frame or window. |
| 3. If the software is automatically and accurately budgeted with the NavigatorTM software, the operator who has qualified the process can select the solder paste used from the database of solder paste characteristics that has been set. SlimKIC Start automatically sets the required process frame or window. Reduce the need for repeated testing. The need for testing. |
| 4. SlimKIC Start provides PWI indicators to assist operators in understanding the process capabilities. The operator can decide if he wants to fine tune the optimization. |
| 5. If combined with NavigatorTM software, it can automatically select the *good set point among all possible parameter setting combinations, and continuously optimize without manual judgment and experiment. |
| 6. If you use AutoFocusTM software, you can calculate the initial process parameters from the previous setup experience. No need to guess by yourself. The software also has an automatic learning function, and with enough experience, it can complete the *good PWI settings at one time. |
| 7. If combined with KIC PilotTM, the furnace parameters can be automatically adjusted for some furnaces without manual adjustment. |
| 8. On a PCBA such as a complex or a large number of BGAs, the traditional 5-channel time-measuring thermometer has been unable to meet the technical requirements. |
| 9. The KIC series offers 6, 9 to 12 channels. KIC Start offers 6 channels. Wave soldering and reflow soldering are common. |
| 10. The furnace temperature tester is currently the industry's first-class thermometer. In software, the analog curve function, the curve comparison function and the temperature measurement accuracy are unmatched in other similar brands; on the hardware, the general elimination is omitted. The thermometer main unit and the incubator adjust the separate and cumbersome process twice during temperature measurement. The main unit is placed directly in the insulation box of the temperature-insulating material, and it is not necessary to take out the computer interface directly during measurement and reading. |
| KIC furnace temperature tester KIC2000, reflow oven temperature tester KIC2000 KIC SlimKICTM provides you with a high degree of accuracy and automation! |
| 1. High performance software |
| KIC NavigatorTM is the choice of SlimKIC Start. The software automatically analyzes thousands of temperature and chain speed combinations and provides user-optimized settings in a very short period of time (within one minute). |
| 2. Fast and easy to use |
| The user only needs to tell KIC NavigatorTM his process requirements, and the software will tell him the best setting point. Its high degree of automation enables operators who are not familiar with the process to use it. Users no longer have to try several times to get a positively optimized setup. |
| 3. More accurate and optimized process settings |
| Due to the limitation of time resources, the increase or decrease of manual setting is generally not too small (about 5oC). KIC NavigatorTM can be adjusted at a fine range of 1oC to optimize process settings. |
4. BUY AND SELL USED EQUIPMENT1. SMT FULL LINE SOLUTIONService:5.WE sell and buy used equipmentS long-term4.100%T/T before shipment OR 30%T/TADVANCE,Banlance 70% before shipment, after we shipped the goods, we will email you the shipping information3. Item shipped from china mainland using airmail by EMS, UPS, DHL, TNT or Hong Kong post, we accept the customer’s shipping request2. Most orders ship within 1~7days after payment1. We ship to world wideShipment:Delivery time:Within 1~3 working daysPackaging details:VACUUM&WOODENBOXPackaging & Shipping3. AI INSERT MACHINE, SMT PERIPHERY EQUIPMENT SUPPLIER
5. Manufacuture of SMT FEEDERS AND NOZZLES
6. WE HAVE PROFESSIONAL ENGINEER TEAM
Company Information:
2. SMT PRINTER,PICK AND PLACE MACHINE,REFLOW OVEN,CONVEYOR,AOI,SPI,LOADER AND UNLOADER SUPPLIER
Shenzhen SMTLINE Technology Co., Ltd. was established in June 2005
1.registered capital of 6 million yuan and more than 60 employees.
2.The company's core personnel of the professional R&D team have 15 years of automated R&D and manufacturing experience.
3.Our company has developed and mass-produced refow oven and wave welding machine at the end of 2010. The machine is the first in the country.
4.The sales volume of products reached more than 200 units in half a year.
5.Our philosophy: integrity, strength first, wholeheartedly for the customer.
6.Our company adhering to the customer first, service-oriented business philosophy,
benign competition, will continue to work hard to learn, so that more customers to use the quality and cheap SMT china high-end equipment, for customers to save labor costs, factory costs.
Business Scope:
1.Buy and sells SMT pick and place machines(YAMAHA JUKI FUJI,SAMSUNG,PANASONIC,,SIEMENS,ASSEMBLON,Mirae, SONY,...
2.SMT Full-auto printer&semi-auto printer
3.SMT reflow oven& wave solder machine
4.SMT loader and unloader
5.SMT conveyor
6.AOI, SPI
7.SMT peripheral equipment.
8.Insert machine
9.Machine spare parts such as feeders nozzles
10.Full line solution service
Contact:
CNSMT Electronics Equipment Co,.LTD
Ms:Lizzy wong
Email:Lizzy@smtlinemachine.com
info@smtlinemachine.com
www.smtlinemachine.com
Mb/whatsapp/wechat:+8615915451009
SKYPE:smtdwx
Our products are sold all over the world, you can rest assured.
